Pro-Tek LL-290S Adjustable Lowering Links Made For 1998 1999 2000 2001 Honda VFR-800FI, 2002 2003 2004 2005 2006 2007 2008 2009 Honda VFR-800/A and a 2014-2015 Honda VFR-800F/FD VFR800F/FD

You are looking at one Pro-tek CNC fully adjustable lowering link (Pro-tek Part No. LL-290S) that replaces the single stock link on a 1998-2001 Honda VFR-800FI Interceptor, 2002-2009 Honda VFR-800 Interceptor (Non ABS model), 2002-2009 Honda VFR-800A (ABS model) and a 2014-2015 Honda Interceptor VFR-800F/FD Deluxe .This link is made up of a Carbon Steel hex turnbuckle center and two hardened steel rod ends that have ball bearings with a lube-free teflon race. It also comes with adjusting nuts to tighten down when the desired ride height is reached. It also has four aluminum bushings for easy fitment. These aluminum bushings inserted into the rod ends make this link the same thickness as your stock link. This means your stock bolts and nuts are retained and the locking element of the nuts will still be engaged.Hardened Steel rod ends with teflon race are used with a carbon steel center piece to protect against binding and seizing from metal on metal corrosion when threading.The center hex turnbuckle is carbon steel, case hardened and then zinc plated to protect against oxidation and corrosion.Fully Adjustable Links allow you to make infinite adjustments on the fly without having to unbolt the lowering link and dThis kit is brand new in original packaging, manufactured in the USA, and comes complete with manufacturer warranty.These links come with infinite settings that lower the bike from 1" to 5".**Note: For Fully Adjustable Lowering Links, you may have to loosen the top and/or bottom shock bolts (without removing) to realign with link during link installation. There is wiggle room in shock bolts if shock is touching the link. However, when adjusting the bike extremely low, some bikes may need a slight amount of material removed from the bottom of the shock mount for clearance .

• Comes with Stainless Steel Rod Ends and aluminum spacers for easy bolt on.
• Lowers bike from stock to four inches with turn of center piece.
• Carbon steel center and two stainless steel rod ends with adjusting nuts to tighten down when the desired ride height is reached.
• CNC made center piece is gold zinc plated to protect against oxidation and corrosion.
• Fully Adjustable Links allow you to make adjustments on the fly without having to unbolt the lowering link.